The SS5000 dispenses adhesive and many other types of fluids through a disposable syringe tube. The SS5000 can be made to be adapted to the customer's own syringe tube. The dispenser is portable, hand-held, and easy to use. It can be mounted at any location, using a special mounting bracket. The syringe tube is fitted with a special adapter for better control of the shot volume.

SS5000 Syringe System maintains high repeatability and is a close loop system where no fluid is exposed.

Replacing a new syringe tube is easy, first, open the valve and slowly pull back the actuator lever through its knob. Then, loosen the adapter chuck and remove the used syringe tube and throw it away. To start the operation, close the valve and push the start button or an optional footswitch.

The customer has the choice of a relay controller or PLC controller. The PLC controller can be operated through the front panel switches or it can be connected to an IBM PC (or compatible) computer. The relay controller is operated only through the front panel switches or the footswitch terminal.

SS5000 SPECIFCATIONS

Repeatability : 99.5% Viscosity : Low to high viscous fluid Syringe Type : 10 cc air-operated syringe tube Stroke Incr./Syringe Tube : 0.120" (max) Cylinder Stroke : 3.0" (max) Air Requirement : 100 - 120 psi. Controllers : SAC 1100 or CLC 1100

Repeatability is the measure of the consistency of shot volume delivery, obtained by calculating the ratio of any shot volume to the average shot volume of a particular pump stroke setting multiplied by 100. Accuracy is determined by comparing actual shot volume to the preset shot volume, calculated as the quotient of the actual shot volume to the preset shot volume, multiplied by 100. Data in website is based on tests performed using water as the pumping media. PATENT PENDING Teflon® and Viton® are registered trademarks of DuPont Dow Elastomers.

SS5000 FEATURES

Hand-held dispenser Dispenses adhesives and abrasive fluid Adaptable to customer's syringe 99.5% repeatability Closed loop system Choice of relay or PLC controller Hydraulic drive Dispenses in small to bigger dots or a line Can dispense low to high viscous fluid

To Order or for Additional Information: E-mail: pumps@semicontechpro.8m.com

BACK TO FLUID PUMP MAIN

Note: The following equipment were purchased new are slightly used for R&D application only. The number of substrates processed is very minimal, so, all equipment are in very good condition. Ages are more or less 5 years old.

Please search the entire for your semiconductor equipment and related product need. You may use this search engine in your website. It is FREE. Click on the link to register.

Advertise FREE Worldwide!

-Do you want to Sell Products and Services Online?
-Do you want to Buy Products and Services Online?
-Do you want to Advertise Worldwide FREE?
-How about something as simple as Creating Your Own Simple Online Store?
-Would you like to spend quality time with your family or meet your
buddies for special occasion IN THE MIDDLE OF THE WEEK?

People just like you can make their dreams come true everyday - and they can do it on the Internet... and they can do it with our own

-Do you want to use an entire webpage in various formats for your Products and Services?
-Do you want to use a part of a webpage in table format for your Products and Services?
-Do you want to use a part of a webpage in plain text advertisement for your Products and Services?
-Do you want to use banner or button advertisement for your Business?
-How about something as simple as Creating Your Own Simple Online Store?