|
The M2100 is a stand-alone pump,
motorized fluid delivery systems designed to support
multi-nozzle delivery of accurate, repeatable shots over a
presettable volume range. The systems are fully
programmable. The standard configuration includes one pump
module, but configurations of up to ten pump modules are
also available. The system is built for demanding
applications that require performance and adaptability for
micro dispensing.
The M2100 is designed for applications
as diverse as pharmaceutical, biotechnology, semiconductor
fabrication and assembly, medical dispensing, food
production . . . virtually any, manufacturing or laboratory
environment where repeatability and accuracy must be
maintained. And because the systems incorporate
FDA-compliant wetted components, they can be designed into
many liquid applications where purity of the medium is
critical.
The M2200 has a built in adjustable
continously flow controller using a variable speed
motor.
Note: All information
contained in this website is subject to engineering change
without notice.
Teflon® and Viton® are registered trademarks of
DuPont Dow Elastomers.
M2100 SPECIFICATIONS
PUMP MODULE |
PISTON DIA. |
PRESETTABLE SHOT RANGE
|
FLUID PRESSURE, MAX
|
*FLUID INLET (NPT)
|
*FLUID OUTLET (NPT)
|
MPL0402-PV |
0.125 in |
0.010 - .050 ml |
120 psig. |
1/16 in |
1/16 in |
MPL0404-PV |
0.250 in |
0.08 - .200 ml |
120 psig. |
1/16 in |
1/16 in |
| Valve Type |
: Check Ball |
| Viscosity |
: 5,000 cp |
| Piston Stroke |
: .25 in |
| Stroke Adjustment |
: .001 Resolution Micrometer |
| Operating Cycle (fixed) |
: 60 cycles/min |
| Accuracy |
: 99.9% |
| Repeatability |
: 99.7% |
| Piston Material |
: Alumina Ceramic |
| Wetted Material |
: Polyethylene, 316SS, Ceramic, Viton, Teflon
|
| Pump Module Dimensions |
: 1 1/8 in (dia.) x 3.7 in |
| Pump Module Weight |
: 1.5 lbs. |
| Electrical Requirements |
: 110 VAC, 60Hz |
| Max. Pumps Per System |
: 10 |
|
|
| Controllers |
: SAC 2000 |
|
CLC 2000 |
|
|
|
Repeatability is the measure of the
consistency of shot volume delivery, obtained by calculating the ratio of any shot volume
to the average shot volume of a particular pump stroke setting multiplied by 100. Accuracy is determined by comparing actual shot volume to the
preset shot volume, calculated as the quotient of the actual shot volume to the preset
shot volume, multiplied by 100.
Data in website is based on tests performed using water as
the pumping media.
PATENT PENDING
Teflon® is a registered trademark of Dupont.
Viton® is a registered trademarks of DuPont Dow
Elastomers.
SEE FEATURES
To Order or for Additional
Information:
E-mail: pumps@semicontechpro.com
|
M2100 FEATURES
| Pump module is easy to maintain and clean
|
| Autoclavable pump components |
| Adaptable for remote operation |
| Minimum dead volume for easy priming |
| Purging with minimum effort |
| Programmable, presettable shot volume |
| Clean material cut-off |
| Micrometer adjustable at .001 in resolution
|
| Relay or PLC controller abvailable |
| SEE SPECIFICATIONS
|
BACK TO FLUID PUMP MAIN
M2200 SPECIFICATIONS
PUMP MODULE |
PISTON DIA. |
PRESETTABLE SHOT RANGE
|
FLUID PRESSURE, MAX
|
*FLUID INLET (NPT)
|
*FLUID OUTLET (NPT)
|
MPL0402-AF |
0.125 in |
.050 ml (fix) |
5700 psig. |
1/16 in |
1/16 in |
MPL0404-AF |
0.250 in |
.200 ml (fix) |
1450 psig. |
1/16 in |
1/16 in |
| Valve Type |
: Check Ball |
| Viscosity |
: 5,000 cp |
| Piston Stroke |
: .25 in |
| Operating Cycle (fixed) |
: 10 - 188 cycles/min |
| Accuracy |
: 99.9% |
| Repeatability |
: 99.5% |
| Piston Material |
: Alumina Ceramic |
| Wetted Material |
: Polyethylene, 316SS, Ceramic, Viton, Teflon
|
| Pump Module Dimensions |
: 1 1/8 in (dia.) x 3.7 in |
| Pump Module Weight |
: 1.5 lbs. |
| Electrical Requirements |
: 110 VAC, 60Hz |
| Max. Pumps Per System |
: 2 |
|
|
| Controllers |
: (Built In) |
|
|
|
|
|
Repeatability is the measure of the
consistency of shot volume delivery, obtained by calculating the ratio of any shot volume
to the average shot volume of a particular pump stroke setting multiplied by 100. Accuracy is determined by comparing actual shot volume to the
preset shot volume, calculated as the quotient of the actual shot volume to the preset
shot volume, multiplied by 100.
Data in website is based on tests performed using water as
the pumping media.
PATENT PENDING
Teflon® is a registered trademark of Dupont.
Viton® is a registered trademarks of DuPont Dow
Elastomers.
SEE FEATURES
To Order or for Additional
Information:
E-mail: pumps@semicontechpro.8m.com
|
M2200 FEATURES
| Pump module is easy to maintain and clean
|
| Autoclavable pump components |
| Adaptable for remote operation |
| Minimum dead volume for easy priming |
| Purging with minimum effort |
| Clean material cut-off |
| Built in continuous flow controller. |
| SEE SPECIFICATIONS
|
P4000 | P3000/2000 | P2100 | M3000/2000 | SS5000 | P2100
SD
BACK TO FLUID PUMP MAIN
R&D Semiconductor Equipment . . . For Sale!!!
Note: The following equipment were purchased new are slightly used for R&D application only. The number of substrates processed is very minimal, so, all equipment are in very good condition. Ages are more or less 5 years old.
| Item
| Equipment
| Model
| Notes
| Voltage/Current
| Dimensions
|
| 1
| SK Vapor Dryer
| 51028
| IPA Dryer
| 240V/70A
| 45W X 24D X 100H
|
| 2
| AEP Stripper
| UC-7550
| Flat Panel Stripper
| 208V/200A
| 74W X 50D 94H
|
| 3
| O3 Detector
| IN 2000-3
| Ozone Monitor
| 120V/1.5A
| N/A
|
| 4
| Steag Wet Etch
| FPD-400
| Wet Etch with Robot
| 208V/60A
| 71W X 51L X 65H
|
| 5
| AKT RIE
| 1600-ETCH
| 2 Etch Chambers
| 208V/240A
| Cluster Tool
|
| 6
| AKT PVD
| 1600-PVD
| 2 Sputter Chambers
| 208V/320A
| Cluster Tool
|
| 7
| Steag Coater
| FPD 400
| Resist Coater/Developer
| 208V/175A
| 115W X 82D X 73H
|
| 8
| Tamarack
| T-300
| Photo Lithography Tool
| 208V/15A
| 67W X 59D X 103H
|
Please search the entire for your semiconductor equipment and related product need. You may use this search engine in your website. It is FREE. Click on the link to register.
Please contact us at:
OLM Enterprises
Tel: (408)259-1900 Fax: (408)259-1990
Toll Free Tel/Fax: 1-888-925-8293
C1: Semiconductor Equipment Support List | C2: Semiconductor Equipment List | C2A: Semiconductor Equipment List | C2B: Semiconductor Equipment List | C2C: Semiconductor Equipment List | Vacuum Pump List | C3: More Vacuum Pumps | C5B: New Vacuum Pumps | C4: High Vacuum Systems | C5A: Rebuilt He Leak Detectors | C6A: More Semiconductor Equipment | Furnaces & Film Measurement | C6C: Implanters, Sputterers, Steppers, Etc. | C6D: Wafer Track, Inspection, Transfer Systems, & More | C7A: Rebuilt Plasma Systems | C7B: Vacuum Systems, Pumps, Power Supplies | C8: Vacuum Packaging Equipment | C9: Semiconductor Equipment, Used, Surplus | C10: Special Vacuum System |
C11: R&D Vacuum Systems and More Semiconductor Equipment |
C12: Semiconductor and High Tech Equipment |
C13: Semiconductor Equipment for Eight Inch (8”) Wafer Fab | Mass Flow Controller List | Mass Flow Controller List, GR-2 | Mass Flow Controller List, GR-3 | MFC Related Equipment List | Ion Implanter Parts & Services | Applied Materials Parts List | Equipment List | Lam Systems Parts List |Tegal Systems Parts List | Varian Parts List | Microscope & Accessory List | New Parts List | Related Equipment List | Test Systems & More Semi Equipment | Online Resources | Online Affiliates | Want List | Want List, G-2 | Hot List Sale | Advertise Worldwide Online
Advertise FREE Worldwide!
Classified Ads Online at OLM Enterprises-
The Last Advertising Opportunity you will
EVER need!
-Do you want to Sell Products and Services Online?
-Do you want to Buy Products and Services Online?
-Do you want to Advertise Worldwide FREE?
-How about something as simple as Creating Your Own Simple Online Store?
-Would you like to spend quality time with your family or meet your
buddies for special occasion IN THE MIDDLE OF THE WEEK?
If you think those things can't happen to you - think again!
People just like you can make their dreams come true everyday -
and they can do it on the Internet... and they can do it with our own
Classified Ads Online
People can now make the whole world know that they have products to sell or products to buy!!!
Advertise Worldwide Online
Web Page Advertising at OLM Enterprises-
The Other Advertising Opportunities you may
EFFICIENTLY need!
-Do you want to use an entire webpage in various formats for your Products and Services?
-Do you want to use a part of a webpage in table format for your Products and Services?
-Do you want to use a part of a webpage in plain text advertisement for your Products and Services?
-Do you want to use banner or button advertisement for your Business?
-How about something as simple as Creating Your Own Simple Online Store?
Webpage Advertising Formats
for more information.
Copyright ©1999 OLM Enterprises
  
|
